WT255 Cable & Wire Tracer for RJ45, Phone & BNC
WT255 Digital Cable Tracer: RJ45 / BNC / Phone / RVV Tracing | Wire Map with On-Screen Results | PD PoE Pair Check | NCV | Requires a Compatible Steedvision Tester with the Cable Tracer App
- Secure payment
- 30-day returns
- Money-back protection
- 1-year warranty
Business Purchase
Buying on behalf of a company?
We can help with:
- Proforma Invoice (PI)
- Bank Transfer (T/T)
- Bulk Order Pricing
- Company Invoice
- Dedicated Sales Support
Buyer Protection
Secure payment
Card payments are processed by Stripe and PayPal. Your card details go straight to them and never reach us.
30-day returns
Return unused items in their original packaging within 30 days of delivery. No restocking fee. We cover return shipping for damaged, faulty or incorrect items; for change-of-mind returns you pay the return shipping. Refunds reach your original payment method within 5-7 business days.
Money-back protection
If it arrives damaged or develops a fault within 7 days of delivery, we send a free replacement or refund you in full. If your order has not shipped within 7 days of payment, cancel it for a full refund. If the carrier confirms it lost, or it has not arrived 15 business days after the latest estimated delivery date, we send a replacement or refund you in full.
1-year repair warranty
Hardware faults under normal use are repaired free for 1 year. We troubleshoot remotely first, then send a prepaid label and cover shipping both ways. Physical damage, water damage and unauthorised repairs are not covered. Your statutory consumer rights are not affected.
SKU: WT255
Description
WT255 Digital Anti-Jamming Cable Tracer
Find the right cable before testing the far end. A compatible Steedvision Android tester sends the tracing signal; the WT255 receiver helps identify RJ45 network, telephone, BNC coaxial and RVV power or control cable runs. Digital anti-jamming mode reduces false identification when cables are bundled or tangled.
Requires a compatible tester. The WT255 cannot be used on its own. It needs a Steedvision Android tester with the Cable Tracer app installed. RJ45 tracing and wire mapping work with most models; BNC, RVV and telephone tracing require an IPC-9800, X7 or X9 series tester and crocodile clips connected to the copper core or shield braid.
Trace by Sound or Use Earphones
Adjust the sensitivity wheel as you approach the cable. Use the built-in speaker, or switch to silent mode and connect earphones to the 3.5mm jack. The receiver has MODE, SNCV and RJ45status buttons, plus an RJ45 port for use as the wire-map remote.
Wire Mapping on the Tester Screen
Connect the WT255 RJ45 port as the remote at the far end of a cable connected to the tester's UTP/SCAN port. The tester screen shows the wire map, open circuits, short circuits, reversed connections and mispaired wires. The WT255 indicators 1–8 and G show the wiring status in sync with the screen. Shielded cable shields can also be detected.
Short-circuit testing requires Cable Tracer app version 7.2; version 7.1 does not support it. The Cable Tracer V7.2 interface shows the tracing waveform on the left and wire map on the right, with icons for anti-jamming, a PoE switch port, the 60V protected interface, PD power detection, shielded cable and shield detection.
Check PoE Power Pairs and Sense AC Voltage
Plug the WT255 into a PoE switch port to identify whether power is present on pairs 12/36 or 45/78. The two port indicators show power on 12/36, on 45/78, or on both when the switch supplies power adaptively. The interface has a 60V withstand rating and a burn-protection design.
For NCV non-contact AC voltage sensing, bring the receiver close to a socket, terminal or power cable; it beeps when AC voltage is sensed.
Included with These Tester Models
The WT255 is supplied as standard with the following models:
- IPC-9800C Pro+, IPC-9800CADH Pro+, IPC-9800CADHS Pro+, IPC-9800CMADHS Pro+, IPC-9800MOVTADHS Pro+
- IPC-7600C Plus, IPC-7600CADH Plus, IPC-7600CADHS Plus, IPC-7600COTADHS Plus, IPC-7600COVTADHS Plus
- IPC-5100C Plus, IPC-5200C Plus, IPC-1900C Plus, IPC-1910C Plus
- HD-3100C Plus, HD-3200C Plus, K15-CADH, K15-CMADHS
Buying a Replacement or Adding a Tracer
Buy a WT255 separately to replace a lost or damaged original receiver. If your tester did not originally include a tracer, check digits 3–4 of its serial number: 24 or lower can use the WT255 after the Cable Tracer app is installed; 25 or higher does not support this add-on use.
Before ordering, send your tester serial number to customer service so we can confirm compatibility.
- Power: two AA 1.5V batteries (not included).
- Dimensions: 218 × 47 × 30 mm.
- Net weight: 110 g, excluding batteries.
FAQ
How much is shipping and how long does delivery take?
Shipping is free to the US and most of Europe. The shipping cost and estimated delivery date for your country are shown above Add to Cart and again at checkout, and every order ships with a tracking number sent by email.
Will I have to pay import duties?
Where it is offered, choose "Duties & Taxes Paid" at checkout to pay import duties and taxes upfront, with nothing to pay on delivery. Otherwise any duties and taxes are collected by the carrier on delivery. Not offered for your country? Contact us for a duties-paid quote.
What warranty does it come with?
A 1-year repair warranty, and we cover shipping both ways for repairs. If it arrives damaged or develops a fault within 7 days of delivery, we replace it or refund it in full at no cost to you.
Can I return it?
Yes, within 30 days of delivery if it is unused and in its original packaging. There is no restocking fee, and we cover return shipping for damaged or incorrect items.
Which payment methods do you accept?
PayPal and major credit and debit cards at checkout. Business orders can also pay by bank transfer (T/T).
Can I get a company invoice or bulk pricing?
Yes. We provide proforma invoices, company invoices, bank transfer payment and bulk order pricing. Contact us through the Business Purchase box on this page.